pages

Categories

Throttlebody


Sort By:
VRP 90mm Throttle body bolt on Kit BBK

VRP 90mm Throttle body bolt on Kit BBK

$1,290.00
VRP 90mm Throttlebody KitThis is the largest snout currently available for the m113k platform. Drastically increase throttle response, low end torque, and horsepower.The fastest M113k cars in the world run the BBK 90mm throttlebody. Includes:90mm x 3.5" silicone Y pipePrecision ported snout with welded adapterNew 90mm ThrottlebodyHardware$300 core Deposit or advance core required. Please..
VRP Throttlebody Methanol Adapter Plate
  • -23%

VRP Throttlebody Methanol Adapter Plate

$175.00 $135.00
Want to run meth without pulling your supercharger? This plate bolts directly to your ported snout and 82 or 85mm throttlebodyThis is the simplest method of running a single nozzle on your m113kTest results show a 7* peak drop with just one single nozzle before the supercharger.Add the nozzle kit to complete the bolt on setup.*For complete methanol solutions with tanks and pumps please refer ..
82mm Throttle body bolt on Kit
  • -14%

82mm Throttle body bolt on Kit

$699.99 $599.00
Includes82mm Throttle Body*82mm Throttle body Adapter platePorted supercharger inlet snoutHardwareVacuum PlugThis kit allows you to adapt your 74mm throttle body to an 82mm throttle body for up to 37whp!**If purchasing this kit the 3” aluminum intake kit is recommended or 80mm sl55 Y pipe if you wish to retain the stock intake boxes and filters.$300 core charge will be refunded upon return of your..
82mm Throttle Body supercharger inlet Snout Porting Service

82mm Throttle Body supercharger inlet Snout Porting Service

$175.00
CNC Porting Service for your Supercharger snoutWe will Bore out your supercharger snout to 82mm to match our 82mm Adapter plate!85mm is also available!Note: Cores must be returned within 30 days for core charge to be returned...
82mm Throttlebody Adapter plate
  • -38%

82mm Throttlebody Adapter plate

$160.00 $100.00
*** THE ORIGINAL! ***VRPs very own 82mm throttlebody adapter plate!Bolt on M113K plate and hardware,74mm-82mm compatible with MB Throttle Body part # 273 141-03-25.This bolts to the factory Supercharger snout.*SC snout must be bored to match, this can be done with a die grinder by handRTV black silicon may be used for the gaskets on both sides. Made in Virginia USA!..
85mm Throttle body bolt on Kit

85mm Throttle body bolt on Kit

$999.99
Includes85mm Throttle Body*85mm Throttle body Adapter platePorted supercharger inlet snoutHardwareVacuum PlugThis kit allows you to adapt your 74mm throttle body to an 85mm throttle body for up to 45whp!**If purchasing this kit the 3” aluminum intake kit is recommended or 80mm sl55 Y pipe if you wish to retain the stock intake boxes and filters.$300 core charge will be refunded upon return of your..